The following messages are for the VR Series of imagesetters inclusive of the following models:
| VR30 | VR36 | VR36HS | VR45 | VR45HS |
Status Message: Meaning:
| OFFLINE |
The system is currently offline or “Test Patterns” has been selected in Interface Mode Menu. |
|
| ONLINE | The system is currently online. | |
| NO CASSETTE |
There is no output cassette on the imagesetter. | |
| OUT OF FILM |
The system has run out of film or paper. Media is advanced beyond the Capstan Drive and Pinch Rollers. A cut signal is initiated to the Online Processor, but no cut is performed. These actions flush the media from the recorder and initiate online processing |
|
| CUTTER NOT PARKED |
The cutter has not parked completely. If the cutter is not parked, go to the Diagnostic Park Cutter window. The cutter will then try to cycle correctly. If it does not, contact an Authorized Service Representative. |
|
| WAITING FOR PROCESSOR READY |
Waiting for the Online Processor to Go Ready. | |
| RECORDING IMAGE |
Status message indicating the imagesetter is currently recording an image. |
|
| ADVANCING MEDIA | This message appears when the ADVANCE Key is pressed. | |
| CUTTING MEDIA | This message appears when the CUT Key is pressed or system is performing an imagesetter cut cycle. |
|
| REMOVE CASSETTE | This message appears after a Cut has been completed to remind you to remove the output cassette and process the output. |
Error Message: Meaning:
| System Error #1 |
Drive motor error | |
| System Error #2 | SOL (start of line) error | |
| System Error #3 |
No active Video error | |
| System Error #4 |
Fatal cutter error |