Machine Error Codes

CtP – Computer to Plate

Heidelberg ProSetter

Error:             Description:                                                        More Details:  0   Recorder is ready for operating      1   Internal Error   An error occurred in the program sequence   2   Internal Error   An error occurred in the program...

Topsetter 74 / Acento II / Screen PT-R4xxx

Error:            Description:  Ex101    Nip roller does not ascend  Ex102    Nip roller does not descend  Ex103    Transport unit does not ascend  Ex104    Transport unit does not descend  Ex105    Trail clamp arm does not ascend  Ex106    Trail clamp arm does not...

Topsetter 102 screen pt r8xxx

Error:            Description:  Ex101  Nip roller does not ascend  Ex102  Nip roller does not descend  Ex103  Transport unit does not ascend  Ex104  Transport unit does not descend  Ex105  Trail clamp arm does not ascend  Ex106  Trail clamp arm does not descend  Ex107...

Polyester CtP – Computer to Polyester Plate

Mitsubishi Eco 1630

  Serial Error  An internal communication error occurred. Re-boot the machine. JAM1  The plate is jammed. Cutter not completed cut. JAM2  The plate is jammed. Continual discharge. JAM3  The plate is jammed. Plate not discharged. I/F Error 1  A SCSI communication error...

Presstek DPM

Presstek DPM 2508 / Presstek DPM 2340 / Presstek DPM Pro 400 Presstek DPM 2508 Error         Possible Cause                              Recommended Action    6012    Media jam in drum or guide box    Clear all media from the drum and guide box area  6013...

Esko DPX System Error Codes

Error Description All errors have both a name and a number that have been divided into different types.    O    Operator has interrupted a sequence, while in Loader Service program  O1    Error may occur during loading/unloading new material  J    Error may occur...

CtF – Computer to Film

ECRM Mako Series

The following messages are for the Mako Series of imagesetters inclusive of the following models: Mako 36 Mako 3600 Mako 3625 Mako 3650 Mako 3675 Mako 46 Mako 4600 Mako 4625 Mako 4650 Mako 4675 Status Message:                    Meaning: OFFLINE   The system is...

ECRM VR Series

The following messages are for the VR Series of imagesetters inclusive of the following models: VR30 VR36 VR36HS VR45 VR45HS Status Message:                    Meaning: OFFLINE   The system is currently offline or "Test Patterns" has been selected in Interface Mode...

ECRM Marlin 46 & 63

Problem:                               Possible Cause: System Error #1 ( Drive Motor Error)  The Motor connector is not properly connected. The Motor has failed. Controller failure. System Error #2 (INDEX Error)  Spinner Motor may not be functioning. Controller...

ECRM Stingray 46 & 63

Error Message:                        Possible Cause: System Error #1 ( Drive Motor Error)  The Motor connector is not properly connected. The Motor has failed. Controller failure. System Error #2 (No Spinner Index Error)  Spinner Motor may not be...

ECRM Knockout 4550

 Message:                                  Meaning: System Error #1   DC drive motor error. System Error #2  Spinner Index error. System Error #3   No ACTIVE VIDEO error. System Error #4   Fatal cutter error. System Error #5   DC Lazy Loop error. System Error...

Linotronic 560

Boot Status Messages Code:                                               Description: INIT RECORDER START  Recorder initialization started INIT RECORDER 0  Time loop of about 45s. (LES power on delay) INIT RECORDER 1  Polygon drive initialized using the last X...

Linotronic 530

Boot Status Messages Code:                                               Description: INIT RECORDER START  Recorder initialization started INIT RECORDER 0  Time loop of about 45s. (LES power on delay) INIT RECORDER 1  Polygon drive initialized using the last X...

Linotronic 330

 Boot Status Messages Code:                                               Description: INIT RECORDER START  Recorder initialization started INIT RECORDER 0  Time loop of about 45s. (LES power on delay) INIT RECORDER 1  Polygon drive initialized using the last X...

Linotronic 300R

 Boot Status Messages Code:                 Description: 200  Selftest 0  201  Selftest 1 202  Selftest 2 203  Selftest 3 204  Selftest 4 205  Selftest 5  206  Selftest 6 207  Selftest 7 208  Selftest 8 210  Selftest done    Recorder Messages Error Code:    ...

Heidelberg Herkules

Error Index: 0000-9FFF: Errors  0000-00FF: reserve   0100-08FF: boot system   0800-0FFF: main control   1000-1FFF: communication control   2000-2FFF: video control   3000-3FFF: Material control   4000-4FFF: feed control   5000-5FFF: user interface   6000-6FFF: machine...

Inkjet Printers

Epson Stylus Pro 3800

 Maintenance Codes Error Code:      Description: 0001  The counter of waste ink used for printing margins at   borderless printing has reached the specified value. 0002  The CR scan pass counter has reached the specified value.  (ink supply tube has reached its end of...