Boot Status Messages
Code: Description:
| 200 | Selftest 0 | |
| 201 | Selftest 1 | |
| 202 | Selftest 2 | |
| 203 | Selftest 3 | |
| 204 | Selftest 4 | |
| 205 | Selftest 5 | |
| 206 | Selftest 6 | |
| 207 | Selftest 7 | |
| 208 | Selftest 8 | |
| 210 | Selftest done |
Recorder Messages
Error Code: Description:
| 001 | Film End | |
| 002 | No take up cassette | |
| 003 | Take up cassette full | |
| 004 | Caution: Tako malfunction | |
| 005 | Cutter not home | |
| 006 | Density malfunction | |
| 007 | OLP-FLAG too long | |
| 010 | Exposure active | |
| 011 | Exposure ready | |
| 012 | Exposure stopped | |
| 013 | Test exposure ready | |
| 014 | Text exposure ready | |
| 020 | Film load active | |
| 021 | Film load ready | |
| 022 | Take up cassette fitted | |
| 023 | Insert film | |
| 024 | Adjust film | |
| 025 | Film in transport | |
| 026 | Film load stopped | |
| 030 | Film unload active | |
| 031 | Film unload active | |
| 032 | Take up casette is fitted | |
| 040 | Film advance active | |
| 041 | Film advance ready | |
| 050 | Cut active | |
| 051 | Cut ready | |
| 052 | Cut stopped | |
| 100 | Caution: Polygon error | |
| 101 | Abort: Fine density error | |
| 102 | Abort: Coarse density error | |
| 103 | Abort: Density adjust | |
| 104 | Film start / stop. No start | |
| 105 | Film start / stop inactive | |
| 110 | Abort: Fatal error BELI | |
| 111 | Abort: Command error | |
| 112 | Abort: Data error BELI | |
| 113 | Abort: X/Y error | |
| 116 | Abort: Machine parameter | |
| 120 | Abort: Film load command error | |
| 121 | Abort: Film shutter does not close | |
| 122 | Abort: Film Tension | |
| 141 | Abort: Film unload command error | |
| 150 | Abort: Cutter does not move | |
| 151 | Abort: Cutter is blocked | |
| 160 | Abort: No input processor Clk | |
| 161 | Abort: No output process Clk | |
| 162 | Abort: Input window counter | |
| 163 | Abort: Output window counter | |
| 164 | Abort: Altern buffer A counter | |
| 165 | Abort: Altern buffer A data | |
| 166 | Abort: Altern buffer B counter | |
| 167 | Abort: Altern buffer B data | |
| 180 | Abort: Bus error | |
| 181 | Abort: Address error | |
| 182 | Abort: Ilegal instruction | |
| 183 | Abort: Zero divide | |
| 184 | Abort: CHK instruction | |
| 185 | Abort: TRAPV instruction | |
| 186 | Abort: Privilege violation | |
| 187 | Abort: Trace | |
| 188 | Abort: Reserved | |
| 189 | Abort: Trap | |
| 190 | Abort: Auto vector interrupt | |
| 191 | Abort: Hardware vector interupt | |
| 215 | Message: Adjust active | |
| 216 | Message: Adjust ready | |
| 217 | Message: Exposure active | |
| 218 | Message: Exposure ready | |
| 219 | Message: Density adjust active | |
| 220 | Message: Density adjust ready | |
| 221 | Message: Tako adjust active | |
| 222 | Message: Tako adjust ready | |
| 233 | O.L.P. error. No take up cassette | |
| 235 | Sender not active | |
| 236 | SOPR inactive | |
| 237 | SSCN exceeds active length | |
| 238 | Timeout LI2 | |
| 240 | LI5 not available | |
| 246 | EEprom error Write | |
| 248 | EEprom error Data | |
| 252 | EEprom error Block | |
| 254 | NV ram error (LT50) |