07814 652568 steve@rsprepress.com

Epson Stylus Pro 3800

Inkjet Printers

 Maintenance Codes
 Error Code:      Description:
 0001    The counter of waste ink used for printing margins at  
 borderless printing has reached the specified value.
 0002    The CR scan pass counter has reached the specified value.
 (ink supply tube has reached its end of life.)
 0008    The RTC backup battery becomes exhausted.
 0040    The pump counter has reached the specified value.
 0080    The date has not been set.
 0100    The RTC backup battery power has temporarily dropped.
 0800    The ink cartridge installation/removal counter has reached
 the upper limit.
 1000    The number of drives of the ink selector has reached the
 upper limit.
 0088    RTC backup battery has not been set.

   

 Service Call Errors

 Error Code:      Description:
 1101    CR life error
 1120    CR lock error
 1121    CR reverse error
 1122    CR overspeed error
 1123    Duty over error
 1124    Drive timeover error
 1125    CR home position detection error
 1126    CR lock release error
 1127    CR lock set error
 1130    Overspeed error (PID-load positioning)
 1131    Drive timeover error (PID-load positioning)
 1132    Out of sync. (PID-load positioning)
 1133    Positioning time-out (PID-load positioning)
 1134    Integral term overload (PID-load positioning)
 1135    Encoder test error (PID-load positioning)
 1220    Overspeed error
 1221    PF measurement error
 1222    Drive timeover error
 1223    Encoder test error
 1224    Out of sync
 1225    Positioning time-out
 1226    Integral term overload
 131B    Head driver (transmission gate) temp. error
 1400    Pressure motor drive timeover
 1401    Air leaks
 1403    Pressure reducing error
 1404    Pump movement cycle over error
 1410    Drive time monitor time-out (PUMP)
 142D    Pump cap unit life error
 1425    CSIC communication time-out
 1430    Holder ink pad error

 

Epson Stylus Pro 9900

Epson Stylus Pro 9xxx

Maintenance Codes
 Error Code:      Description:
 0010    Communication with the AID Board is not established.
 The voltage applied to the Flushing Box does not reach the specified 
 level.
 4000    It detects twice in a row that all the nozzles are clogging.
 8000    Detects Noises during AID operation.
 
Service Call Errors
 Error Code:      Description:
 1101    CR life error
 1125    CR HP detection error
 1138    Over current error 
 113A    Overload error
 113B    Over speed error
 113C    Reversing error
 113D    Driving time-out error 
 113E    Velocity deviation error 
 113F    Lock error
 122A    Overload error
 122B    Over Speed error
 122C    Reversing error
 122D    Driving time-out error
 122E    Velocity deviation error
 122F    Lock error
 131B    Head driver (transmission gate) overheat error 
 13F0    ICL operation error
 1411    Select error
 1412    Pump life error
 1419    Pump release error
 141A    Overload error
 141B    Over Speed error
 141C    Reversing Error
 141D    Pump phase detection error
 141E    Type-B board installation error
 141F    Lock error
 1427    CSIC destination setting error
 1428    Ink holder Board Assy
 1430    Holder ink pad error
 1431    Ink selector life error
 1434    IC cover unlock error
 1438    Maintenance tank error
 1439    Cap error
 143A    Overload error
 143B    Over speed error
 143C    Reversing error
 143D    Driving time-out error
 143E    Velocity deviation error
 143F    Lock error
 144A    Overload error
 144B    Over speed error
 144C    Reversing error
 144D    Driving time-out error
 144E    Velocity deviation error
 144F    Lock error
 1488    Flushing box position error
 1489    Wiper error
 148A    Overload error
 148B    Over speed error
 148C    Reversing error
 148D    Driving time-out error
 148E    Velocity deviation error
 148F    Lock error
 1494    Ink selector error
 1496    Ink selector sensor error detection
 1497    Switching time-out error
 149D    Driving time-out error
 1501    Release motor phase detection error
 150C    PG phase detection error
 151A    Overload error
 151B    Over speed error
 151C    Reversing error
 151D    Driving time-out error
 151E    Velocity deviation error
 151F    Lock error
 152A    Overload error
 152B    Over speed error
 152C    Reversing error
 152D    Driving time-out error
 152E    Velocity deviation error
 152F    Lock error
 1530    Driven roller HP detection error
 1536    Pressurizing reset error
 1537    Pressurizing error
 153A    Overload error
 153B    Over speed error
 153C    Reversing error
 153D    Driving time-out error
 153E    Velocity deviation error
 153F    Lock error
 1540    Cutter HP detection error
 1541    Cutter return error
 1549    Motor disconnection error
 154A    Overload error
 154B    Over speed error
 154C    Reversing error
 154D    Driving time-out error
 154E    Velocity deviation error
 154F    Lock error
 1551    Paper thickness determining error
 1561    Paper thickness at power-on error
 1800    AID voltage error
 1A23    Incorrect RTC data error
 1A26    RTC Access T/O error
 1A37    Thermistor error
 1A38    Transistor environmental temperature error
 1A39    Head error
 1A40    IC22 error
 1A41    Head rank ID input error
 1A50    I2C communication error (Between elements on ASIC and MAIN)
 1A51    I2C communication error (Between elements on SUB and MAIN)
 1A52    I2C communication error (Between elements on SUB-B and MAIN)
 1A53    I2C communication error (Between elements on SUB-C and MAIN)
 2000    NVRAM error
 2002    SDRAM error
 2003    FLASH BOOT SUM CHECK error
 200A    F/W load error
 200D    System interrupt watchdog time-out error
 200E    Unknown NMI
 2010    UART communication error
 3000    AC shut-off
 D131    AID error
 Fxxx    CPU-related error
 Dxxx    Debug error

 

 

Epson Stylus Pro 9890

Epson Stylus Pro 9xxx

Maintenance Codes
 Error Code:      Description:
 0010    Communication with the AID Board is not established.
 The voltage applied to the Flushing Box does not reach the specified
 level.
 4000    It detects twice in a row that all the nozzles are clogging.
 8000    Detects Noises during AID operation.
 
 Service Call Errors
 Error Code:      Description:
 1101    CR life error
 1125    CR HP detection error
 1138    Over current error 
 113A    Overload error
 113B    Over speed error
 113C    Reversing error
 113D    Driving time-out error 
 113E    Velocity deviation error 
 113F    Lock error
 122A    Overload error
 122B    Over Speed error
 122C    Reversing error
 122D    Driving time-out error
 122E    Velocity deviation error
 122F    Lock error
 131B    Head driver (transmission gate) overheat error 
 13F0    ICL operation error
 1411    Select error
 1412    Pump life error
 1419    Pump release error
 141A    Overload error
 141B    Over Speed error
 141C    Reversing Error
 141D    Pump phase detection error
 141E    Type-B board installation error
 141F    Lock error
 1427    CSIC destination setting error
 1428    Ink holder Board Assy
 1430    Holder ink pad error
 1431    Ink selector life error
 1434    IC cover unlock error
 1438    Maintenance tank error
 1439    Cap error
 143A    Overload error
 143B    Over speed error
 143C    Reversing error
 143D    Driving time-out error
 143E    Velocity deviation error
 143F    Lock error
 144A    Overload error
 144B    Over speed error
 144C    Reversing error
 144D    Driving time-out error
 144E    Velocity deviation error
 144F    Lock error
 1488    Flushing box position error
 1489    Wiper error
 148A    Overload error
 148B    Over speed error
 148C    Reversing error
 148D    Driving time-out error
 148E    Velocity deviation error
 148F    Lock error
 1494    Ink selector error
 1496    Ink selector sensor error detection
 1497    Switching time-out error
 149D    Driving time-out error
 1501    Release motor phase detection error
 150C    PG phase detection error
 151A    Overload error
 151B    Over speed error
 151C    Reversing error
 151D    Driving time-out error
 151E    Velocity deviation error
 151F    Lock error
 152A    Overload error
 152B    Over speed error
 152C    Reversing error
 152D    Driving time-out error
 152E    Velocity deviation error
 152F    Lock error
 1530    Driven roller HP detection error
 1536    Pressurizing reset error
 1537    Pressurizing error
 153A    Overload error
 153B    Over speed error
 153C    Reversing error
 153D    Driving time-out error
 153E    Velocity deviation error
 153F    Lock error
 1540    Cutter HP detection error
 1541    Cutter return error
 1549    Motor disconnection error
 154A    Overload error
 154B    Over speed error
 154C    Reversing error
 154D    Driving time-out error
 154E    Velocity deviation error
 154F    Lock error
 1551    Paper thickness determining error
 1561    Paper thickness at power-on error
 1800    AID voltage error
 1A23    Incorrect RTC data error
 1A26    RTC Access T/O error
 1A37    Thermistor error
 1A38    Transistor environmental temperature error
 1A39    Head error
 1A40    IC22 error
 1A41    Head rank ID input error
 1A50    I2C communication error (Between elements on ASIC and MAIN)
 1A51    I2C communication error (Between elements on SUB and MAIN)
 1A52    I2C communication error (Between elements on SUB-B and MAIN)
 1A53    I2C communication error (Between elements on SUB-C and MAIN)
 2000    NVRAM error
 2002    SDRAM error
 2003    FLASH BOOT SUM CHECK error
 200A    F/W load error
 200D    System interrupt watchdog time-out error
 200E    Unknown NMI
 2010    UART communication error
 3000    AC shut-off
 D131    AID error
 Fxxx    CPU-related error
 Dxxx    Debug error

 

 

Epson Stylus Pro 9700

Epson Stylus Pro 9xxx

Maintenance Codes
 Error Code:      Description:
 0010    Communication with the AID Board is not established.
 The voltage applied to the Flushing Box does not reach the specified 
 level.
 4000    It detects twice in a row that all the nozzles are clogging.
 8000    Detects Noises during AID operation.
 
 Service Call Errors
 Error Code:      Description:
 1101    CR life error
 1125    CR HP detection error
 1138    Over current error 
 113A    Overload error
 113B    Over speed error
 113C    Reversing error
 113D    Driving time-out error 
 113E    Velocity deviation error 
 113F    Lock error
 122A    Overload error
 122B    Over Speed error
 122C    Reversing error
 122D    Driving time-out error
 122E    Velocity deviation error
 122F    Lock error
 131B    Head driver (transmission gate) overheat error 
 13F0    ICL operation error
 1411    Select error
 1412    Pump life error
 1419    Pump release error
 141A    Overload error
 141B    Over Speed error
 141C    Reversing Error
 141D    Pump phase detection error
 141E    Type-B board installation error
 141F    Lock error
 1427    CSIC destination setting error
 1428    Ink holder Board Assy
 1430    Holder ink pad error
 1431    Ink selector life error
 1434    IC cover unlock error
 1438    Maintenance tank error
 1439    Cap error
 143A    Overload error
 143B    Over speed error
 143C    Reversing error
 143D    Driving time-out error
 143E    Velocity deviation error
 143F    Lock error
 144A    Overload error
 144B    Over speed error
 144C    Reversing error
 144D    Driving time-out error
 144E    Velocity deviation error
 144F    Lock error
 1488    Flushing box position error
 1489    Wiper error
 148A    Overload error
 148B    Over speed error
 148C    Reversing error
 148D    Driving time-out error
 148E    Velocity deviation error
 148F    Lock error
 1494    Ink selector error
 1496    Ink selector sensor error detection
 1497    Switching time-out error
 149D    Driving time-out error
 1501    Release motor phase detection error
 150C    PG phase detection error
 151A    Overload error
 151B    Over speed error
 151C    Reversing error
 151D    Driving time-out error
 151E    Velocity deviation error
 151F    Lock error
 152A    Overload error
 152B    Over speed error
 152C    Reversing error
 152D    Driving time-out error
 152E    Velocity deviation error
 152F    Lock error
 1530    Driven roller HP detection error
 1536    Pressurizing reset error
 1537    Pressurizing error
 153A    Overload error
 153B    Over speed error
 153C    Reversing error
 153D    Driving time-out error
 153E    Velocity deviation error
 153F    Lock error
 1540    Cutter HP detection error
 1541    Cutter return error
 1549    Motor disconnection error
 154A    Overload error
 154B    Over speed error
 154C    Reversing error
 154D    Driving time-out error
 154E    Velocity deviation error
 154F    Lock error
 1551    Paper thickness determining error
 1561    Paper thickness at power-on error
 1800    AID voltage error
 1A23    Incorrect RTC data error
 1A26    RTC Access T/O error
 1A37    Thermistor error
 1A38    Transistor environmental temperature error
 1A39    Head error
 1A40    IC22 error
 1A41    Head rank ID input error
 1A50    I2C communication error (Between elements on ASIC and MAIN)
 1A51    I2C communication error (Between elements on SUB and MAIN)
 1A52    I2C communication error (Between elements on SUB-B and MAIN)
 1A53    I2C communication error (Between elements on SUB-C and MAIN)
 2000    NVRAM error
 2002    SDRAM error
 2003    FLASH BOOT SUM CHECK error
 200A    F/W load error
 200D    System interrupt watchdog time-out error
 200E    Unknown NMI
 2010    UART communication error
 3000    AC shut-off
 D131    AID error
 Fxxx    CPU-related error
 Dxxx    Debug error

 

 

Epson Stylus Pro 9880C

Epson Stylus Pro 9xxx

Maintenance Codes
 Error Code:      Description:
 0002    The number of carriage movement cycles reached the specified value.
 0040    The pump counter reached the specified upper limit.
 0400    The Pressure Pump counter reached the specified upper limit.
 
 Service Call Errors
 Error Code:      Description:
 

 00000101  

    The CR motor reached its end of life 
 00010000      PF motor encoder check error 
 00010001      PF motor out of step 
 00010002      Overcurrent occurred in the PF Motor
 00010003      The PF motor out of position time out error
 00010004      CR motor encoder check error 
 00010005      CR motor out of step 
 00010007      The CR Motor out of position time-out error 
 00010008      Servo interrupt watchdog time-out error
 00010009      System interrupt watchdog time-out error
 0001000A      Carriage home position detection error 
 0001000C      PG home position detection error 
 00010014      Failure of pressurizing 
 0001001B      Head driver (TG) temperature error 
 0001001D      CR servo parameter error 
 0001001E      PF servo parameter error 
 00010020      CSIC reading / writing error 
 00010023    RTC analysis error
 00010026    RTC communication error
 00010027    Pressure pump micro air-leak error
 00010028    Head error
 0001002A    CR ASIC ECU error
 0001002D    The Cleaning Unit reached its end of life
 00010035    Pump phase detection error
 00010036    Type-B board installation error
 00010037    Head thermistor error
 00010038    Transistor thermistor error
 0001003E    Pressure Sensor failure
 0001003F    The Pressure Motor reached its end of life
 00010040    Printing position error
 00020000    NVRAM error
 00020002    SDRAM error
 00020003    BOOT program SUM error
 0002000A    Program load error
 0002000B    The internal memory is insufficient
 0Dxxxxxx    An error code for debugging
 0Exxxxxx    A time-lag of the RTC timer
 100000E0    CPU address error (load)
 10000100    CPU address error (store)
 10000180    CPU reserve command code exception error
 100001A0    CPU slot undefined command exception error
 100001C0    The AC power is shut off
 100005C0    CPU DMA address error
 10000xxx    CPU error