07814 652568 steve@rsprepress.com

Epson Stylus Pro 4400

Epson Stylus Pro 4xxx

Maintenance Codes
Error Code:   Description:
 0002    The number of CR movement cycles has reached predetermined value
 0008    RTC backup battery shut off / uninstalled
 0040    Pump counter has reached predetermined amount
 0080    Date is not set
 0088    RTC backup battery is not installed
 0100    RTC backup battery pressure is temporally low
 0200    The number of ASF paper feeding has reached predetermined value
 
Service Call Errors
Error Code:      Description:
 00000101      The CR motor life 
 00001A40    Communication error between the main board and sub board
 00010000      PF motor encoder check error 
 00010001      PF motor out of step 
 00010002      PF Motor over current
 00010003      PF Motor in-position time-out
 00010004      CR Motor Encoder check error
 00010005      CR motor out of step 
 00010006    CR Motor over current
 00010007      CR Motor in-position time-out
 00010008      Servo interrupt watchdog time-out
 00010009      System interrupt watchdog time-out
 0001000A      CR axis detection error 
 0001000C      PG axis detection error
 0001000F    CR Motor PWM output faulty
 00010010    PF Motor PWM output faulty
 00010012    CR overload (high sensitivity) error
 00010013      PR overload (high sensitivity) error
 0001001B      Head driver (TG) temperature error 
 0001001D      CR servo parameter error 
 0001001E      PF servo parameter error 
 00010020      CSIC reading / writing error 
 00010020    Ink type error (setting on printer body side)
 00010022    Ink type error (setting on printer body side)
 00010023    RTC analysis error
 00010025    CSIC ROM communication error
 00010026    RTC communication error
 00010028    Head error
 00010029    Unidentified NMI
 0001002A    CR ASIC ECU error
 0001002B    PF ASIC ECU error
 0001002D    The Cleaning Unit reached its end of life
 0001002F    360 DPI writing time out error
 00010030    Multi Sensor failure
 00010031    ASF phase detection error
 00010032    ASF drive switch error
 00010033    Eject phase detection error
 00010034    Eject movement error
 00010035    Pump phase detection error
 00010036    Type-B board installation error
 00010037    Head thermistor error
 00010038    Transistor thermistor error
 00010039    PG adjustment value incorrect overwrite error
 0001003A    PG adjustment value outside range error
 0001003B    Cutter installation error 1
 0001003C    Cutter installation error 2
 0001003D    Cutter installation error 3
 00020000    NVRAM error
 00020002    SDRAM error
 00020003    BOOT program SUM error
 00020009    Flash memory SUM error
 0002000A    Program load error
 0002000B    The internal memory is insufficient
 0003xxxx    Debug error code
 0Dxxxxxx    Debug error code
 0Exxxxxx    RTC timer off error
 100000E0    CPU address error (load misalignment)
 10000100    CPU address error (storage misalignment)
 10000180    CPU reserve command code exception error
 100001A0    CPU slot illegal command exception error
 100001C0    AC disruption
 100005C0    CPU DMA address error
 10000xxx    CPU error
 

Epson Stylus Pro 4000

Epson Stylus Pro 4xxx

Maintenance Codes
 Error Code:      Description:
 0002    Carriage Motor / Ink Tube end of life
 0004    Nozzle check error
 0008    RTC error ( Real Time Clock)
 0010    Multi Sensor Error
 0020    Print Head life counter
 0040    Cleaner Unit end of life
 0080    Date is not set
 0100    RTC Battery low
 0200    Paper feed roller life (over 75,000 sheets)
Service Call Errors
 Error Code:      Description:
 00000088    RTC (Real Time Clock) data is corrupted
 00000101    Carriage Motor life
 00000103    RTC (Real Time Clock) battery is defective
 00000105    Print Head end of life
 00010000    Paper Feed Motor encoder check error
 00010001    Paper Feed Motor out of step
 00010002    Paper Feed Motor over current
 00010003    Paper Feed Motor in-position time-out 
 00010004    Carriage Motor encoder check error
 00010005    Carriage Motor out of step
 00010006    Carriage Motor over current
 00010007    Carriage Motor in-position time-out
 00010008    Servo Interrupt watchdog time-out
 00010009    System Interrupt watchdog time-out
 0001000A    Carriage home position error
 0001000C    Platen Gap home position error
 0001000F    Carriage Motor PWM output faulty
 00010010    Paper Feed Motor PWM output faulty
 0001001B    Head driver (TG) temperature error
 0001001D    Carriage servo parameter error
 0001001E    paper feed servo parameter error
 00010020    CSIC read / write error
 00010022    Ink type error
 00010023    RTC (Real Time Clock) (Reset RTC)
 00010025    CSIC ROM communication error
 00010026    RTC (Real Time Clock) communication error
 00010028    Head error
 00010029    Unidentified NMI
 0001002A    Carriage ASIC ECU error
 0001002B    Paper feed ASIC ECU error
 0001002D    Cleaning unit end of life
 0001002F    360 DPI writing time our error
 00010030    Multi Sensor failure
 00010031    ASF (Auto Sheet Feeder) home position error
 00010032    ASF (Auto Sheet Feeder) Drive Switch error
 00010033    Exit Roller home position error
 00010034    Eject Roller lifted
 00010035    Pump Home Position error
 00010036    Type B 1394 (Firewire) board installation
 00010037    Print Head thermistor error
 00010038   Head Driver thermistor error 
 00010039    PG adjustment value NVRAM error
 0001003A    PG adjustment value NVRAM error
 0001003B    Carriage Lock / Cutter Error
 0001003C    Carriage Lock / Cutter Error
 0001003D    Carriage Lock / Cutter Error
 00020000    NVRAM error
 00020002    SDRAM error
 00020003    Boot program SUM error
 00020009    Flash memory SUM error
 0002000A    Program load error
 0002000B    Internal memory shortage error
 0002000C    Review error
 100000E0    CPU address error (load misalignment)
 10000100    CPU address error (storage misalignment)
 10000180    CPU reserve command code exception error
 100001A0    CPU slot illegal command exception error
 100001C0    AC distribution (AC Power)
 100005C0    CPU DMA address error
 0003xxxxx
 0Dxxxxxxx		   CPU error 

ECRM Mako Series

Computer to FIlm, error codes

The following messages are for the Mako Series of imagesetters inclusive of the following models:
 Mako 36  Mako 3600  Mako 3625  Mako 3650  Mako 3675
 Mako 46  Mako 4600  Mako 4625  Mako 4650  Mako 4675
 
Status Message:                    Meaning:
 OFFLINE
 		    The system is currently offline or “Test Patterns” has been selected
 in Interface Mode Menu.
 ONLINE

    The system is currently online.
 NO CASSETTE
 		    There is no output cassette on the imagesetter.
 OUT OF FILM
 		    The system has run out of film or paper. Media is advanced beyond
 the Capstan Drive and Pinch Rollers. A cut signal is initiated to the
 Online Processor, but no cut is performed. These actions flush the
 media from the recorder and initiate online processing
 CUTTER NOT PARKED
 		    The cutter has not parked completely. If the cutter is not parked, go to
 the Diagnostic Park Cutter window. The cutter will then try to cycle
 correctly. If it does not, contact an Authorized Service Representative.
 WAITING FOR
 PROCESSOR READY
 		    Waiting for the Online Processor to Go Ready.
 RECORDING IMAGE
 		    Status message indicating the imagesetter is currently recording an
 image.
 ADVANCING MEDIA    This message appears when the ADVANCE Key is pressed.
 CUTTING MEDIA    This message appears when the CUT Key is pressed or system is
 performing an imagesetter cut cycle.
 REMOVE CASSETTE    This message appears after a Cut has been completed to remind you
 to remove the output cassette and process the output.
 
 Error Message:                       Meaning:
 System Error #1
 		    Drive motor error
 System Error #2

    SOL (start of line) error
 System Error #3
 		    No active Video error
 System Error #4
 		    Fatal cutter error

ECRM VR Series

Computer to FIlm, error codes

The following messages are for the VR Series of imagesetters inclusive of the following models:
 VR30  VR36  VR36HS  VR45  VR45HS
 
Status Message:                    Meaning:
 OFFLINE
 		    The system is currently offline or “Test Patterns” has been selected
 in Interface Mode Menu.
 ONLINE

    The system is currently online.
 NO CASSETTE
 		    There is no output cassette on the imagesetter.
 OUT OF FILM
 		    The system has run out of film or paper. Media is advanced beyond
 the Capstan Drive and Pinch Rollers. A cut signal is initiated to the
 Online Processor, but no cut is performed. These actions flush the
 media from the recorder and initiate online processing
 CUTTER NOT PARKED
 		    The cutter has not parked completely. If the cutter is not parked, go to
 the Diagnostic Park Cutter window. The cutter will then try to cycle
 correctly. If it does not, contact an Authorized Service Representative.
 WAITING FOR
 PROCESSOR READY
 		    Waiting for the Online Processor to Go Ready.
 RECORDING IMAGE
 		    Status message indicating the imagesetter is currently recording an
 image.
 ADVANCING MEDIA    This message appears when the ADVANCE Key is pressed.
 CUTTING MEDIA    This message appears when the CUT Key is pressed or system is
 performing an imagesetter cut cycle.
 REMOVE CASSETTE    This message appears after a Cut has been completed to remind you
 to remove the output cassette and process the output.

 

 Error Message:                       Meaning:
 System Error #1
 		    Drive motor error
 System Error #2

    SOL (start of line) error
 System Error #3
 		    No active Video error
 System Error #4
 		    Fatal cutter error